Archive for Automotive

NEW LOW PROFILE HIGH PERFORMANCE TIRE MACHINE $2,799.00

Tire Changer LT-3950A, Single Assist Arm, 13″-26″

Product Overview

Tire changer LT-3950A is a tire machine with an assist designed for heavy volume automotive repair shops, car dealerships and tire dealers. Combined by the assist helper on right side, this tire machine allows an operator to handle low-profiles and high performance tires off wheels with minimal fatigue.
With external clamping range from 12” (internal 14”) to 24” (internal 26”), this tire machine can handle almost all of wheel and tire assemblies of passenger cars and light-duty commercial vehicles.
Dual wheel clamping cylinders control four clamping jaws with protective covers, which can hold the wheel securely to avoid damage to expensive and delicate wheels. Driven by a sturdy and powerful cylinder, the bead shovel accommodating 5500 lbs of power makes loosening the bead a snap. On-board combos of air regulator, water separator and lubricator allow this tyre changer working at designated pressure and keeping pedal valves and cylinders maintenance-free.
Extra accessories come complimentary with plastic clamping jaws protective covers, mount/demount head inserts, polymer mount/demount head, Clip-on inflation with gauge, bead shovel foot, and bead lever tool.
Optional clamping adaptors expand this tire changer workable on motorcycle and ATV tire and wheel assemblies.
Comparing to LT-3910, Tire changer LT-3950A not only features bigger clamping range, Jet-blast seating on Jaws, On-board pressure-limited inflation with gauge and aluminum pedal valves, but also a three-piece design assist tower with a Top Roller, Pressing Foot, and Lifting Disc, which allow operator to change low-profiles and run-flat tires with ease.
Tire Changer with assist arm LT-950A
Features

Swing arm convenient for operation
Assistant arm facilitating handling wide and low profile tires
Clamping system with stepping function
Jet blast system integrated
Steel mount/demount tool with rubber pads
Polymer mount/demount tool
Plastic clamps protection covers
Air reserve tank
Soap liquid reservoir
Specifications

Power supply/ Motor power 110V/ 1.5HP
Air pressure required 115-145 psi
Rim clamping range ( External ) 13″-24″
Rim clamping Range( Internal ) 15″-26″
Bead break force 5500 lbs
Max. wheel diameter 43″
Max. wheel width 15″
Noise <70db
Shipping weight 825 lbs
Shipping dimensions 47″x37″x34″

LOW PROFILE HP TIRE MACHINE

LOW PROFILE HP TIRE MACHINE

MOTORCYCLE TIRE CHANGER 6″-22″ $1,599.00

MOTORCYCLE TIRE CHANGER

MOTORCYCLE TIRE CHANGER

Motorcycle Tire Changer LT-3490, 6″-22″
Product Overview

Motorcycle Tire Changer LT-3490 is a rim clamp motorcycle tire changer designed to handle motorcycle rims as wheel as car and truck rims. With external clamping range 1st position from 6” (internal 8”) to 15” (internal 17”),2nd position from 10” (internal 12”) to 20” (internal 22”), this motorcycle tire machine can handle almost all of motorcycle wheel and tire assemblies. Dual wheel clamping cylinders control four clamping jaws with protective covers, which can hold the wheel securely to avoid damage to expensive and delicate wheels. Driven by a sturdy and powerful cylinder, the bead shovel accommodating 5500 lbs of power makes loosening the bead a snap. On-board combos of air regulator, water separator and lubricator allow this motorcycle tire changer working at designated pressure and keeping pedal valves and cylinders maintenance-free.
Extra accessories come complimentary with mount/demount head inserts, inflation pistol with gauge and bead lever tool.
Optional clamping adaptors expand this tire changer workable on motorcycle and ATV tire and wheel assemblies. Motorcycle Tire Changer LT-3490
Features

Swing arm design
2 Position Adjustable Rim Clamps
Clamping system with stepping function.
Poly-covered mounts/demounts head.
Motorcycle mounts/demounts head
Motorcycle/ATV clamps
Plastic protective covers on jaws
Air regulator and lubricator
Specifications

Power supply/ Motor power 110V 1.5 HP
Pneumatic supply 120 psi
Rim clamping range ( External ) 1st position 6″-15″
Rim clamping range ( Internal ) 1st position 8″-17″
Rim clamping range ( External ) 2nd position 10″-20″
Rim clamping Range( Internal ) 2nd position 12″-22″
Bead break force 5500 lbs
Max. wheel diameter 39″
Max. wheel width 13″
Noise <70db
Shipping weight 470 lbs.
Shipping dimensions 39”x30”x38”

NEW CB550 WHEEL BALANCER FOR CARS LIGHT TRUCKS AND MOTORCYCLES $1,599.00 plus Tax

CB3550BRAND NEW FOR 2015 AUTOMOTIVE AND LIGHT TRUCK WHEEL BALANCER

LOW RATE FINANCING AVAILABLE

CALL MICHAEL 647-825-6794
Wheel Balancer CB-3550

Product Overview

Wheel Balancer CB-3550 is a professional, commercial grade wheel balancer for busy auto repair shop, car dealerships. With this wheel balancer, 3-Data are entered manually. Dynamic Mode is for balancing steel wheels by placing clip on weights on both the inside and outside of the rim. In Static Mode, everything functions the same as in Dynamic mode except balancing the wheel by placing weight on the outside of the rim. ALU1-3 Modes allow the wheel balancer CB-3550 to accommodate diversified structure of ALU wheels by placing stick and/or clip on weights on proper position of the wheels, which do not accept clip on weights on one side or both sides. ALUS1-2 Modes will be the most accurate modes when using stick on weight by entering 4 parameters. Motorcycle Mode allows this wheel balancer to balance motorcycle wheel. An extra adapter for the wheel balancer should be purchased separately. OPT Function is used to optimize the best mating of tire and wheel when unbalancing value is big, and you do not want to put much weight to balance your wheel. HID Function features splitting unbalancing weights to be placed behind spokes.
Features

Static/Dynamic modes
ALU1-3/ALUS/Motorcycle modes
Self calibration
Grams and ounces, mm and inches convertible
Alloy capability
OPT function
Rugged 40mm shaft
Accessories:
Wheel calipers standard
4-piece cones set standard
Light truck flange standard
Speed nut standard
Reverse Bowl standard
Weight pliers standard
Protective hood standard
Specifications

Power supply/ Motor power 110V 250W
Max. Wheel weight 155 lbs
Rim diameter 10″-24″(254-610mm)
Imbalance Resolution ±1g
Cycle time 6-9s
Working ambient 5°C-40°C
Noise <70db
Shipping weight 325 lbs
Shipping dimensions 36”×28”×46”

NEW LT3460 TIRE CHANGER $1,499.00 Plus Tax

BRAND NEW INVENTORY FOR 2015 THE LT3460 TIRE CHANGER

LOW RATE FINANCING AVAILABLE

CALL MICHAEL 647-825-6794
Tire Changer LT-3460, 10″-22″
Product Overview

Tire Changer LT-3460 is a classic tire changer designed for automotive repair shops and quick-lubes. With external clamping range from 10” (internal 12”) to 20” (internal 22”), this tire machine can handle most of wheel and tire assemblies of passenger cars and some commercial vehicles. Dual wheel clamping cylinders control four clamping jaws with protective covers, which can hold the wheel securely to avoid damage to expensive and delicate wheels. Driven by a sturdy and powerful cylinder, the bead shovel accommodating 5500 lbs of power makes loosening the bead a snap. On-board combos of air regulator, water separator and lubricator allow this tire changer working at designated pressure and keeping pedal valves and cylinders maintenance-free.
Extra accessories come complimentary with mount/demount head inserts, inflation pistol with gauge and bead lever tool.
Optional clamping adaptors expand this tire changer workable on motorcycle and ATV tire and wheel assemblies.
Features

Swing arm design
Clamping system with stepping function.
Rubber-pad mounts/demounts tool.
Air regulator and lubricator
Polymer mounts/demounts tool (Optional)
Adapter for motorcycle (Optional)
Specifications

Power supply/ Motor power 110V 1.5 HP
Pneumatic supply 115-175 psi
Rim clamping range ( External ) 10″-20″
Rim clamping Range( Internal ) 12″-22″
Bead break force 5500 lbs
Max. wheel diameter 39″
Max. wheel width 13″
Noise <70db
Shipping weight 500 lbs.
Shipping dimensions 39”x30”x38”lt-3460

AC RECOVERY RECYCLE RECHARGE MACHINE FOR R134A

A/C STATIONProfessional industrial design and excellent appearance.
Patented technology to ensure outstanding stability and reliability.
High standard modularized components to assure low failure rate.
Higher oil separation efficiency.
Universal graphic representation of operating interface.
Simple and convenient to maintain.

Recovery
Vacuum
Recharge
Refrigerant purifying
Recycling
Discharging used oil
Refilling new oil
Printer (Fully-auto model only)
Database (Fully-auto model only)
Flush cleaning (Model end with F only)
System alarm:
High-pressure, Low-pressure, Empty tank, Full tank, Empty new oil bottle, Full old oil bottle, Filter service, Vacuum pump service, Printer no paper, Printer abnomal.

Specifications
Power Supply:AC110V 60Hz
Compressor:12cc
Vacuum Pump:4.5CFM,5Pa
Tank Electric Scale:30kg+_ 10g
Oil Bottie Electric Scale:6kg+_5g
Max. Working Pressure:20Bar/290Psi
Max.Tank Volume:12L
Display:LED(AC-200)

$2,595.00 CANADIAN

LARGE PLATFORM 12,125LB FOUR WHEEL ALIGNMENT SCISSOR LIFT

NEW MODEL FOR 2015

WITH IN GROUND INSTALLATION, LOWERS FLUSH TO THE GROUND.

ADJUSTABLE TURN TABLES

LIFTS 12,125LB RATED  LOW VOLTAGE CONTROLS CE APPROVED

SPECIAL PRICE $15,000.00   FINANCING AVAILABLE

CALL MICHAEL  647-825-6794

CL-S55A

 

NEW 2015 ULTRA 3D WHEEL ALIGNER

Just arrived the new 2015 ULTRA 3D

Two year warranty on parts and labour.

Free set up and calibration.

Ultra bright target, minimizes the sunlight affect.

Ultra 3D Aligner

Ultra 3D Aligner

 

ALIGNMENT SYSTEMS ARE GOING TO BE A LOT MORE AFFORDABLE

SPECIAL PRICE  $14,500.00

CALL MICHAEL 647-825-6794

WE WILL FINANCE

Machine in the factory with valid calibration and it is not necessary to perform
calibration at the customer site
Roll the vehicle to complete the compensation, quickly to get the measurement
data in two minutes
Auto compensation with special clamps and no need to roll the vehicle
Functions of the Track Width, wheelbase, Tire Diameter, Caster Trail, etc
Free from the influence of ambient light and temperature, stable and reliable
The camera bar tracks four targets automatically, more convenient and
widespread measurement in shorter time.
Product Detail Information
Ultra3D wheel aligner is stable, accurate, easy-to-maintain 2 camera system wheel aligner. specially designed for on-ground installation required condition. This product has outstanding & unique feature and the most advanced technology to ensure joyful experience of using the equipment.
Professional, Stable, Durable, Affordable
Professional

Dual camera system
Waterproof targets**
24 inch clamps
Calibration Free*
Fit on-ground installation only
Auto vehicle position compensation
Extra large vehicle database
Stable

Reinforce structure of lateral beam to ensure stability in different working condition
Durable
Calibration Free*
Long life hi-speed camera system
2 years warranty
Affordable

Low service cost
Life-time free vehicle database update twice a year

Ultra3D wheel aligner is a break through of the current 3D whell alignment technology. suitable for Car manufacturer workshops, Independent Workshop or tire service shop with requirement of installation condition without a lift.
*
Calibraton Free
Calibration of the Ultra3D wheel aligner system was done in the factory, doesnt need onsite calibration on installation. this outstanding function saves a lot of work and make installation of the equipment super easy.
Specification

Item Precision Range
Front Total Toe-in ± 0.02° ± 20°
Front Toe-in ± 0.01° ± 10°
Camber ± 0.01° ± 20°
Caster ± 0.02° ± 20°
SAI/KPI ± 0.02° ± 20°
Setback ± 0.02° ± 5°
Tread ± 2mm
Wheelbase ± 2mm

NEW 1 YEAR AUTEL DS708 MAXIDAS TOTAL CARE UPDATE

You will also receive a new 8GB SD card to replace your 4GB card

ONLY $875.00 CANADIAN
WE WILL COME TO YOUR SHOP AND UPDATE THE LATEST SOFTWARE TO YOUR AUTEL DS708 SCANNER

YOU WILL HAVE A ONE YEAR OF SOFTWARE UPDATES FROM THE DATE WE UPDATE YOUR SCANNER

CALL MICHAEL 647-825-6794
Need to update your Autel DS708?
Your purchase of the Total Care Program for the DS708 includes:
• 1-year subscription to the latest software updates for functionality and vehicle coverage
• Technical support from Autel’s staff of ASE certified technicians
• Extended warranty for the DS708 Base Unit*

* If your DS708 stops working during your Total Care Program subscription period you can replace the head unit for $99.95 USD + shipping. After you contact Autel and they agree that the DS708 is at fault they will issue a Return Goods Authorization (RGA) to you along with payment and shipping instructions.
Make it Hassle Free!
AESwave takes the Autel DS708 Total Care Program one extra step to Make it Hassle Free! for you.
With your purchase AESwave will:
– update your existing account with Autel
– redeem your activation code
– remote login to update your SD card
– Contact us via email to set an appointment.TCP1YR

We are a Proud Wholesaler of Genius Tools!

genius_logoAutoPartsPlus.com is a wholesaler of Genius Tools.  Please  Call or email Michael and he will price out your request.  Professional Impact sockets, hand sockets, bit sockets, screwdrivers, air tools, wrenches, pliers, master sets, tool boxes, automotive tools.

You can access the catalogue here

 647-825-6794 

orders@autopartsplus.com

New Diagnostic Smoke Machine Leak Detector Evap & Vacuum

 

 

 

$650 + HST
Call or email Michael

 647-825-6794 

orders@autopartsplus.com

THIS IS THE NEW ALL100 SMOKE MACHINE WITH BUILT IN COMPRESSOR.

WITH BUILT IN COMPRESSOR

Description:

Smoke Automotive Leak Locator ALL-100 is an innovative product that provide safe and convenient method to check leaks in automotive systems. Its so far the fastest way of detecting & locating the leak position of all pipe system in an vehicle at an affordable price, every garage and workshop will need one.
Professional, Flexible, Affordable

Professionel:
Easy to Operate
Fast in helping locate the leak
Multi-functional
Adjustable LED function time control
Adjustable flow control
Inbuild air compressor
Stable output pressure
Best mate for automotive scanner
Time saving features:
Help locate the leak position on all vehicle systems in about 5 minutes
Flexible:
With inbuild air compressor, and power supplied by 12  Volt vehicle battery, its the best tool for leak locating regardless of the working condition.
Affordable:
Unbeatable price / performance ratio
Designed for long time use
Target customer:
Car manufacturer workshops, Independent Workshop or tire service shop, garages etc. where Professional, reliable and affordable equipment is needed.
ALL-100,the Smoke Automotive Leak Locator is a handy new generation of automotive system leak locator.ALL-100 use Mineral Oil to generate smoke. the oil is possible to get at drug store, or supermarket(Mineral Oil based baby Oil) , a 30 ML refill will be enough for test for 40 times( varies, depend on how long the user operate the equipment for each test.)ALL-100 is a one-time invest for a workshop or garage,but will help so much in work.

Specification:
Testing Pressure: 0.03~0.035bar
Air flow control: 0.1~0.5 L/MIN
Power supply : DC12V, 7A, 85W
Packing: L375*W185*H340mm, carton
Weight: 5KG
Requirements on Surroundings
Ambient Temperature – 20°C ~ + 50°C
Relative Humidity ≤ 90%

Simple To Operate
The Smoke Automotive Leak Locator is easily controlled
with a timer setting and flow control. Set the timer then the machine will generate smoke, and control the flow with the flow controller The output is regulated to 12~14 Inches of Water Column,this pressure is perfect to perform leak test of EVAP system and other automotive systems with no damage to the vehicle sealing.
Function time setting:
From 1 minute to 20 minutes
Start/Stop button
Flow Control

Save time and fast leak detect
In most cases, a scan tool may find out pressure sensors abnormal etc., while actully the ‘pressure low’ problem is caused by leak somewhere.

Multi-function
The Smoke Automotive Leak Locator is a multi purpose tool essential for EVAP system, but also applicable for: EGR valves, Gaskets & Fittings, Hoses, Worn Throttle shafts,Break Boosters, Catalytic Converters, Oil Leaks, Lamp Housings, manifolds and more….
LED time indicator, Adjustable air flow and 1 ~ 20 minutes adjustable operating time
Adjustable timer and air flow to perform leak test ondifferent system that requires different flow amount.

Inbuilt air compressor
Performing leak test with no air compressor, which may
not be available for every workshop.

Various fittings
For different application needs

Note:
In considering the complexity of chemical exportatation, in the package there’s no mineral oil included, user could buy mineral oil at drug store or
simply use a bottle of mineral oil based baby oil.

Package list:

Main unit*1
Cap Stopples*17
Schrader Valve Removal Tool*1
Exhaust Cone Adaptor*1
OBD-II Service Port Adaptor*1
Bottle Oiler*1
Flashlight*1ALL100